|
|
|
Pairing Your Plantronics or Jabra Bluetooth Headset
Pairing the headset to any device (we're going to assume a 'phone' here) is a three step process.
- First you need to turn on the Bluetooth feature on your phone. This is generally off by default to conserve battery power. Please see your phone user manual.
- Then, find your headset below for instructions on how to place your headset in pairing mode.
- When you are asked to enter a passkey, or passphrase, enter 0000 (4 Zeros) except models M1000 and M1500 (see below for their number).
Plantronics Discovery 665
Click here for pairing instructions(.pdf)
Plantronics Discovery 655
Click here for pairing instructions(.pdf)
Plantronics Discovery 640
Click here for pairing instructions(.pdf)
Plantronics Voyager 520
Click here for pairing instructions(.pdf)
Plantronics Voyager 510
Click here for pairing instructions(.pdf)
Plantronics Explorer 350
Click here for pairing instructions(.pdf)
Plantronics Explorer 340
Click here for pairing instructions(.pdf)
Plantronics Explorer 330
Click here for pairing instructions(.pdf)
Plantronics Explorer 320
Click here for pairing instructions(.pdf)
Plantronics Pulsar 590A
Click here for pairing instructions(.pdf)
Plantronics Pulsar 260
Click here for pairing instructions(.pdf)
Jabra JX10
Click here for pairing instructions(.pdf)
Jabra 6210
Click here for pairing instructions(.pdf)
Plantronics M3500 (Discontinued)
Pressing and holding down the volume up key and the talk button at the same time. Hold them in together until the indicator light on the headset starts flashing red then green.
Plantronics M2500 (Discontinued)
Pressing and holding down the call control button down while also rotating the multi function dial upward (away from the light) until the indicator light on the headset starts flashing red then green.Plantronics M1000 (Discontinued)
Hit and hold the volume/mute switch in until the indication light starts blinking.
Plantronics M1500 & A500 adapter (Discontinued)
Turn the headset on and the adapter off. On the headset push in and hold the mute/volume dial until the indicator light begins to flash. On the adapter press and hold the blue power button for 10 seconds. The light on the adapter will flash once after 3 seconds- continue to hold the power button for another-7 seconds until the light flashes red. If the pairing is successful, the headset will sound a tone and both the headset and adapter lights will turn off.
Plantronics M1000/M1500 (Discontinued)If you remove the battery cover from the headset and then remove the battery itself. On the Green PC board itself there will be a letter followed by 4 numbers. These 4 numbers are your personal PIN code.
|
|
|
